Home / Shock absorption and safety
Shock Absorption, Grip And Player Safety On Modular Courts
Player safety on a modular court is a combination of the panel, the base beneath it and how the edges are finished. This guide explains what to specify and what to inspect during the life of the surface.
- Cushioned surface behaviour
- Wet-weather grip
- Edge and ramp detailing
- Routine inspection
How a suspended panel cushions impact
A click-fit tile sits on a ribbed support structure that gives the surface a small amount of controlled flex, softening repeated running and landing loads compared with a hard sealed slab. Cushion behaviour depends on panel design and on the base being level; request a declared test method and evaluate a sample panel on site. See elastic cushion tiles.
Grip in dry and wet conditions
Surface texture and the open joints both matter: texture provides shoe traction, while the perforations let water leave the playing line instead of forming a film. Drainage below the panel is equally important. See the drainage guide and indoor vs outdoor notes.
Edges, ramps and trip hazards
Most trips happen at the perimeter, not in the middle of the court. Edge ramps create a gradual transition and should be included in the quantity schedule, along with corner pieces. See the edge ramp guide and the safety checklist for younger users.
Inspection and single-tile replacement
A modular surface can be checked without closing the whole facility: look for lifted locks, damaged ribs, debris in joints and loose ramps, then replace the affected tile from the spare allowance. Keep a simple seasonal log. See seasonal maintenance and the installation guide.
At a glance
| Surface | Interlocking modular tile, 100% virgin PP |
| Structure | Ribbed suspended support for controlled flex |
| Perimeter | Edge ramps and corner pieces in the quantity schedule |
| Grip | Textured surface with open, free-draining joints |
| Maintenance | Visual inspection and single-tile replacement |
| Documentation | SGS on file; RoHS / REACH |
Frequently asked questions
Are interlocking tiles softer than a painted concrete court?
The ribbed suspended structure gives controlled flex that reduces the hardness felt under repeated running and landing, though the base must still be level.
Do the open joints create a trip risk?
No. Joints are flush within the locked surface; the main trip points are the outer perimeter, which is why edge ramps are specified.
How do we check the court each season?
Walk the surface for lifted locks, damaged ribs, blocked joints and loose ramps, then replace any affected tile from the spare allowance.
Can one damaged tile be replaced?
Yes. Individual panels unclip and relock, so a repair does not require resurfacing the whole court.
Related guides
Get a quotation within 24 hours
Send your court size, application, colour requirement and destination port - we reply with options, a free layout drawing and the exact panel quantity.